3D Printer Australia and Maintenance Tips

3D Printer Australia and Maintenance Tips

In Australia and other parts of the world, a 3D printer is used to produce prints on a daily basis. Just like with other types of equipment, a printer is also subject to wear and tear especially with regular use. An industrial machine undergoes periodical preventive maintenance performed by trained technicians to ensure a hassle-free operation, as well as longevity for the equipment. There are simple measures that you need to take to guarantee a smooth-functioning 3D printer.

Maintenance Schedule

Generally, equipment manufacturers perform a preventive maintenance schedule together with the machine’s documentation. Be sure that you check the documentation of your printer. You ma also create a customized schedule for the printer based on general symptoms. Periodic maintenance is always the key.

Visual Inspection

Periodic visual inspection of a 3D printer in Australia is the simplest and very efficient way to maintain your printer. Before a physical breakdown happens, the majority of equipment is likely to display symptoms that lead to a breakdown. A lot of general issues like dust and debris come to fore with the help of visual inspections. Although most parts of the printer can be seen easily, the key is to find the hidden problematic symptoms.


A lot of printers are calibrated in the factory before the delivery and printing. Although this may work for a while, over time, deviations happen. It would be best to periodically check the printer and fine tune the unit. With periodic calibration, mistakes in prints are drastically reduced.


An extruder plays an important role in the printing process. It is very important to clear its nozzle on a regular basis before and after printing. The gear inside needs to be cleared of all remnant plastic bits. At the same time, the filament tension screw should be fine-tuned to get the right filament thickness.


From time to time, you need to oil the different axis rods of the printer. The plastic part that glides over the rods often leaves a residue through time. Clearing this residue and oiling the rods will ensure smooth extruder movement and reduce the load on its axis. Also, lubrication helps reduce noise.

See also: 3d printing systems


Any machine with a movable part is subject to vibrations. As a result of vibration, the nuts and bolts could get loosen and this increases the noise coming from the printer. Thus, the nuts should be tightened regularly in order to lessen this noise and maintain the strong build of the printer.

These are just a few practical tips that can help make sure that your printer is at its best condition so it can perform what is expected of it. Be sure to apply these tips to better take care of your printer.